Lifestyle Sheet Sets for Split Adjustable Beds

Flexible Bed Tension Upgrade Kit

Upgrade your sleep setup and eliminate mattress sag with our heavy-duty Flexible Bed Tension Kit. Specially designed to replace damaged hardware or completely revitalize an aging flexible slat bed frame, this complete kit allows you to customize the firmness of your sleeping surface. By doubling up the support slats in your lumbar zone and adjusting the sliders, you can seamlessly tune your foundation from a soft, body-contouring feel to a highly supportive, extra-firm surface.

Complete Restoration Kit Includes:

• 5 x Primary Support Slats: Your choice of either 730mm or 910mm length.

• 5 x Secondary Tension Slats: Designed to sit flush directly underneath the primary slats to create a dual-layered tuning system.

• 10 x Custom Tension Sliders: Heavy-duty clips that bind the double-layered slats together. Move them outward toward the frame for an ultra-firm feel, or slide them inward for a plusher, softer feel.

Product & Material Specifications

• Premium Birch Construction: Crafted from heavy-duty laminated birch wood, featuring a multi-layered design engineered for maximum spring, durability, and resilience under constant pressure.

• Standard Slat Profile: Machined to an industry-standard width of 53mm and an approximate thickness of 9mm, allowing for excellent cross-compatibility with standard single and double-pin plastic slat shoes.

• Extend Mattress Life: By reinforcing the primary weight-bearing zones of your frame, this kit evenly distributes downward pressure, preventing mattress dipping and significantly extending the lifespan of your mattress and slats.

⚠️ Important Ordering Note: To ensure a proper fit, please measure your existing hardware carefully before purchasing. Because these timber kits are cut to specific profiles, no refunds or returns can be accepted for incorrect sizing choices.

Shipping & Delivery Rates

Due to the bulk, weight, and length of these premium timber upgrade kits, they ship via our dedicated courier network:

• Standard NZ Courier: Enjoy a flat $19 courier charge within New Zealand, regardless of how many complete kits you add to your order.

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

Woola Natural Latex Mattress Topper

Breathe new life into your current mattress and experience plush, body-contouring pressure relief with the Woola Natural Latex Topper. Boasting a substantial 50mm thickness of pure, high-resilience natural latex, this premium topper instantly smooths out structural mattress imperfections while delivering a buoyant layer of orthopedic support that cushions your shoulders, hips, and lower back.

Product Features & Styling

• 50mm High-Resilience Natural Latex: Features a dense, 50mm core of premium natural latex that dynamically responds to your body shape. Unlike synthetic memory foam, latex won't lock in heat or cause a sinking, "stuck" sensation.

• Eco-Friendly Bamboo Casing: Encased in a luxurious, ultra-soft bamboo protective cover. The breathable bamboo fabric naturally draws away heat and perspiration, and it features a convenient zip-off design for straightforward machine washing.

• Secure-Fit Elastic Corner Straps: Equipped with robust, heavy-duty elastic anchor straps across all four corners, anchoring the topper securely in place on your mattress to prevent sliding or shifting during the night.

• Hypoallergenic & Antibacterial: Natural latex is inherently resistant to dust mites, mold, mildew, and bacteria, making it an exceptional option for asthma and allergy sufferers.

Sizing Options

We offer this topper across the full spectrum of standard New Zealand bedding layouts, ensuring an exact fit for your setup:

• Standard Profiles Available: Single, King Single, Double, Queen, King, and Super King.

• Bespoke Manufacturing: Have a caravan, boat, or custom antique bed frame? Special sizes can be made to order to match your exact dimensions. Contact us directly to arrange a custom production quote.

Shipping & Delivery Rates

All Woola mattress toppers are compressed, packaged securely, and fully tracked across our domestic freight network:

• Standard NZ Courier: Flat-rate $25 courier shipping anywhere within New Zealand.

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

Flexible 1-Pin Slat Shoes (10-Pack)

Replace worn-out, brittle holders and eliminate mattress sag with our flexible, heavy-duty 1-pin replacement slat shoes. Specially designed for imported frames and specialized flexible slat systems, these durable plastic shoes mount securely into a single pre-drilled receiving hole on your bed base rails to lock your wooden slats firmly in place.

Slat Shoe Options

1. Green 1-Pin Slat Shoe (10-Pack)

• Pin Hardware Specs: Engineered for frames featuring a larger mounting layout, with a pin diameter matching an approximate 11mm hole diameter.

• Dimensions & Slat Fit: Features an overall exterior width of 64mm, tailored to fit flexible wooden slats measuring approximately 54mm wide.

• Value Bundle: Sold in a pack of 10 holders, breaking down to a value rate of just $2.50 per holder.

2. Grey 1-Pin Slat Shoe (10-Pack)

• Pin Hardware Specs: Engineered for frames featuring a standard mounting layout, with a pin diameter matching an approximate 9mm hole diameter.

• Dimensions & Slat Fit: Features an overall exterior width of 60mm, tailored to fit flexible wooden slats measuring approximately 54mm wide.

• Value Bundle: Sold in a pack of 10 holders, breaking down to a value rate of just $2.50 per holder.

Important Ordering Note: Slat holders vary significantly depending on the bed manufacturer and style. Please measure your existing hardware carefully—checking both the diameter of the mounting hole on your bed rail and the width of your current timber slats—and view our full selection of Slat Holders before purchasing to ensure a proper fit.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to secure as many replacement hardware packs as your frame restoration requires:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many 10-packs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

Standard 55mm Bed Leg

If you need a reliable, sturdy replacement leg to maintain or slightly adjust your bed height, our 55mm bed legs offer the perfect solution. Designed as a direct screw-in replacement for worn-out or damaged legs, these compact supports provide strong stability for your bed frame or ensemble base.

Product Features

• 55mm Functional Height: Provides a stable, mid-to-low profile lift, offering a great balance between structural clearance and manageable bed height.

• Dual Thread Availability: Available in two common threading standards to match your existing bed base brackets seamlessly:

  • Metric M8 Thread

  • Imperial 5/16 Thread

• Flexible Quantities: The listed price is for a single (1) leg, allowing you to buy the exact number required for your specific bed base setup (e.g., 4, 6, or 9 legs).

• More Options Available: Need a different height or mounting type? Check out our other listings to view our full range of alternative thread types, styles, and available sizes.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to buy as many legs as your frame requires without extra freight penalties:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many legs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

Flexible Slat Tension Sliders (10-Pack)

Customize the firmness of your bed and restore optimal lumbar support with our heavy-duty replacement slat tension adjusters. These sliders act as tension clips, wrapping around overlapping double-slat systems commonly found in premium European-style adjustable bed frames. By sliding them outward toward the edges, you instantly firm up the mattress support zone; sliding them inward creates a softer, more forgiving feel.

Product Features

• Targeted 53mm Slat Design: Engineered to fit standard 53mm wide flexible wooden bed slats smoothly, allowing for seamless adjustment without damaging or scratching the timber.

• Precision Technical Dimensions:

  • Overall Size: 65mm Width x 40mm Depth

  • Overall Thickness: 22mm

  • Internal Gap: 17mm (perfectly sized to tightly clasp double-layered posture slats)

• Value 10-Pack Configuration: Supplied in a convenient pack of 10 tension adjusters, breaking down to a value rate of just $3.50 per slider. This gives you enough hardware to completely upgrade or repair the main lumbar support zone of your bed.

• Restorative Comfort: An excellent, cost-effective fix for older flexible slat frames that have lost their tension over time, saving you from having to purchase an entirely new bed base.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to buy as many hardware packs as your project requires without extra freight penalties:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many 10-packs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

Imperial 5/16" Extra Long 110mm Headboard Bolts

Keep your headboard safely anchored and eliminate annoying wobbles with our premium replacement headboard bolts. Featuring a standard 5/16" Imperial thread, these heavy-duty bolts are specifically engineered to provide a tight, flush fit, locking your headboard securely to the timber framework of your bed base.

Product Features

• Targeted Brand Compatibility: Designed specifically to fit major bedding lines, these bolts are the standard replacement match for Sealy and Sleepsystems bed bases.

• Imperial Hardware Specs: Threaded strictly as an Imperial 5/16" thread.

• Pack Configurations Available: Sold in convenient, ready-to-install sets of either 2 or 4 bolts, allowing you to choose the exact amount required to support your headboard style.

• Alternative Sizes Available: Need a metric variant instead? We stock a comprehensive range of headboard bolts from other manufacturers. Please view our other listings for metric thread options or multi-fit bolts that match nearly all other bed brands.

Important Compatibility Note: Please double-check your bed base inserts and existing hardware before ordering. These bolts are Imperial thread only and will not fit bases that require a metric thread type. However, if your current bed uses metric fittings, you can simply unscrew the old metric inserts using an Allen key and replace them by purchasing our matching Imperial headboard inserts.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to secure as many hardware sets as your household requires without extra freight penalties:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many bolt packs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

100mm Push-In Bed Leg & Glide (Small)

Lower your bed profile or refresh your ensemble base with our small replacement push-in bed legs. Specifically engineered to match major New Zealand bedding brands, these 100mm tall legs feature standard push-in stems that snap securely into your bed base's existing plastic frame plugs, providing excellent stability and a clean, low-profile foundation.

Product Features

• Practical 100mm (10cm) Profile: Standing at a compact 100mm high, this size provides a mid-to-low clearance profile that keeps your bed at an easily accessible height and offers a sleek, grounded look.

• Broad Brand Compatibility: Precision-engineered to fit the push-in model bases of New Zealand's favorite bed brands. They are an ideal match for Sleepyhead, Tattersfield, Beautyrest, and Sleepmaker bases.

• Stationary Glide Design: Equipped with wide, smooth-bottomed glides that distribute weight evenly, offering a highly stable, non-slip base while protecting hard flooring surfaces from scrapes.

• Flexible Quantities: The listed price is for a single (1) leg, allowing you to buy the exact number required for your specific bed layout (e.g., 4, 6, or 9 legs) without being forced to buy a full set.

• Alternative Sizes Available: Looking for a taller setup? Check out our other listings to view our full range of alternative push-in bed leg sizes, including our larger 150mm option.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to buy as many individual legs as your frame requires without extra freight penalties:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many individual legs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.

M6 Slat Bed Barrel Nuts (6-Pack)

Ensure your slat bed frame remains rigid and squeak-free with our heavy-duty M6 replacement barrel nuts (also known as dowel nuts). Designed to work hand-in-hand with standard slat bed bolts, these barrel nuts cross-thread inside your bed rails to pull the joints together tightly, providing a rock-solid structural connection.

Product Features

• Two Length Options Available: Choose the size that perfectly matches the pre-drilled holes in your bed frame side rails:

  • 14mm Length

  • 20mm Length

• Standard Metric Specs: Machined with a precise, clean-threading M6 Metric (6mm) internal thread.

• Value 6-Pack Configuration: Sold in convenient packs of 6 barrel nuts, breaking down to a great value rate of just $2 each. This pack gives you exactly what you need to refresh a standard bed base setup.

• Perfect Hardware Pairing: Engineered to fit perfectly with our 60mm and 90mm M6 slat bed bolts. Check out our other listings for matching bolts and a full range of alternative slat bed accessories.

Shipping & Delivery Rates

Take advantage of our flat-rate shipping policy to buy as many hardware packs as your project requires without extra freight penalties:

• Standard NZ Courier: Enjoy a one-off $7 flat courier charge within New Zealand, regardless of how many 6-packs you add to your order!

• Rural Delivery Surcharge: An additional $6 surcharge applies for all designated rural addresses within New Zealand.

Local Showroom Pickup

• Showroom Pickup: Free collection is always available from our Christchurch showroom.