Slat Bed Holder – 2 Pin (Pack of 10)
$20.00
or 6 weekly interest-free payments from $3.33 with what's this?
Flexible 2 pin shoe – Please view our selection of Slat Holders before purchasing so you choose the correct ones.
BROWN 2 PIN SHOE: 32mm from centre hole to centre hole. Overall size – 58mm x 30mm.
Price is for a pack of 10 – Works out at $2 per holder.
Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries)
Please choose wisely and check your measurements before placing the order.
Categories: Accessories, Slat Bed Parts, Types
Related Products
Waterbed Repair Kit.
Comes with a small tube of glue and piece of vinyl to cut to size.
Repair instructions are in the packet.
$7 courier within NZ - $6 extra for rural
$13.00
Fits Sealy and Sleepsystems beds - These are a 5/16 thread.
Other headboard bolts from other manufacturers are available. View other headboard bolts that fit nearly all others.
Price is for a set of two or four but buy as many as you like for only a one-off $7 courier charge.
(A $6 surcharge for rural deliveries apply)
NOTE: Please check your bed and thread type before ordering, refer to our other Headboard bolts for a metric thread type as these are Imperial thread only. A $15 admin fee will be applied if a refund is to be given.
$12.00 – $22.00
Tension 700mm slat to be added for firmness or softness with the tension sliders.
Not to be used as slats for a slat bed.
Price is for a pack of 5. (Works out at $6 each)
Usually 5 per side is recommended. (You will need 2 tension sliders per slat)
$19 courier within NZ – Add $6 extra for rural delivery.
$35.00
Natural Latex topper. Bamboo zip off washable cover.
Available in all standard bed sizes Single, King Single, Double, Queen, King and Super King. Special sizes made to order.
Elastic straps ensure topper stays in the correct position 50mm thickness.
$25 freight within NZ, rural an extra $6
$699.00 – $1049.00
Price is for a pack of 5 x Corrugated slats of what ever size option you are after.
If you require a special measurement, please insert this size into the form when you purchase. If no measurement is indicated in the notes, we assume you want the larger size.
Otherwise they come in 730mm and 910mm lengths.
Standard width is 53mm and thickness is 9mm approximately.
Buy as many packs as you need for a one off courier freight charge within NZ.
Other sizes are available. Please see other slat accessories.
$19 courier within NZ – Add $6 extra for rural delivery.
Please choose wisely and check your measurements as there are no refunds
$65.00 – $70.00
5.5cm Glide only.
To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
$12.00
Bed bolts for a slat bed -M6 Thread - 60mm or 90mm length.
Price is for a pack of 6 - Buy in groups of 6. ( works out at $2 each)
Please see other slat accessories.
Buy as many as you need for only $7 Freight. ($6 extra for rural deliveries)
$12.00
Flexible double slat shoe. Includes 10 slat holders and 20 joiner pins.
Suits a lot of the Design Mobel Beds.
Overall size - 85mm x 26mm. To fit slats approximately 53mm
Centre hole to centre hole is approximately 65mm. If your measurement is slight out, they do have a bit of flexibility.
Price is for a pack of 10
Buy as many as you need for $7 freight within NZ. ($6 surcharge applies to rural deliveries)
$50.00
Flexible 1 pin shoe options - Please view our selection of Slat Holders before purchasing so you choose the correct ones.
GREEN 1 PIN SHOE: Approx 11mm hole diameter. 64mm wide and will fit slats approximately 54mm.
GREY 1 PIN SHOE: Approx 9mm hole diameter. 60mm wide and will fit slats approximately 54mm.
Price is for a pack of 10 - Works out at $2 per holder.
Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries)
Please choose wisely and check your measurements before placing the order.
$20.00
Classic Latex Pincore Pillow by Logan & Mason.
The pincore construction of the Logan & Mason latex Pillow allows the circulation of air through the latex, keeping the pillow and sleeper cool and fresh. The construction also promotes healthful head and neck alignment utilising the support of latex while remaining soft and comfortable.
Unlike feathers and fibrous material, moulded latex will not create or hold dust and allergens.
The Logan & Mason pillow can be hand washed keeping its shape and supportive quality for years.
$19 courier within NZ – Add $6 extra for rural delivery.
$79.00
DELUXE SET INCLUDES: 4 male and 4 female brackets for the corners for a slat bed. Comes with allen key and 12 bolts.
Overall length size - 115mm
These are the strongest and best fittings for slat bed frames. Makes the bed very sturdy.
STANDARD SET INCLUDES: 4 L Shape corner brackets and 4 side rail brackets.
Overall length size - 90mm
$7 courier within NZ - Add $6 to a rural address.
$45.00 – $65.00
6 x Female Plastic Bed Plug for a bed base with push in bed legs. Mostly for Sleepmaker, Sleepyhead and Beautyrest Beds.
Price is for a set of 6.
Buy as many packs as you need for only $7 courier.
(A $6 surcharge for rural deliveries apply)
$12.00
Most popular headboard fitting sold for most beds - M8 Metric Thread
Fits most Sleepmaker, Slumbertime, Dunlop, Sleepyhead, Tattersfield and Simmons Beautyrest Beds.
Price is for a set of two or four but buy as many as you like for only a one-off $7 courier charge.
(A $6 surcharge for rural deliveries apply)
NOTE: Please check your bed and thread type before ordering, refer to our other Headboard bolts for a imperial 5/16 thread type as these are Metric thread only. Refer to our Sealy Headboard bolt for 5/16 thread type. A $15 admin fee will be applied if a refund is to be given.
$12.00 – $22.00
Price is for a pack of 10.
Flexible 2 pin shoe options for metal rails and import beds – Please view our selection of Slat Holders before purchasing so you choose the correct ones.
BLACK 2 PIN SHOE FOR SIDE RAIL: Approximately 35mm from canter hole to Centre hole. Overall Width size - 65mm, Deep - 30mm. Inside maximum width for slat - 63mm.
These slat shoes are for the common metal frame beds.
Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries)
Please choose wisely and check your measurements before placing the order.
$25.00 – $35.00