Waterbed Repair Kit

Return to Previous Page

Product Description

IMG-9409
Waterbed Conditioner NZD 12.00
IMG-9412
Waterbed Liner for Softsider Price range: NZD 135.00 through NZD 145.00

Waterbed Repair Kit

NZD 13.00

 

Waterbed Repair Kit.

  • Comes with 2 x small tubes of glue and piece of vinyl to cut to size.
  • Repair instructions are in the packet.

 

$7 courier within NZ – $6 extra for rural

Select delivery location

Categories: , , ,

Related Products

tension slat
Quick View
5 x Tension Slats (700mm)
Tension 700mm slat to be added for firmness or softness with the tension sliders. Not to be used as slats for a slat bed. Price is for a pack of 5. (Works out at $6 each) Usually 5 per side is recommended. (You will need 2 tension sliders per slat) $19 courier within NZ – Add $6 extra for rural delivery.
NZD 35.00 Add to cart
Tension Slat Complete
Quick View
Tension Slat Kits
  Slat bed tension set. Tension Slat Kit includes:
  • 5 x 730mm slats or 910mm slats.
  • 5 x tension slats.
  • 10 x tension sliders.
  Heavy duty laminated slats  - Made from birch wood and are layered for extra strength. Standard width is 53mm and thickness is 9mm approximately. Helps improve life of the slats and also can change the feel from a softer or more firmer feel. Please choose wisely and check your measurements as there are no refunds. $19 courier within NZ - Add $6 for rural addresses.
Price range: NZD 125.00 through NZD 130.00 Select options This product has multiple variants. The options may be chosen on the product page
Sale
fsion pillow - classic
Quick View
Sleepmaker Fusion Gel Pillow – 3 Models
  Sleepmaker FusionGel memory foam pillow.
  • Choose between a Traditional, Contour or a Low Profile shape pillow.
  • Ventilated memory foam infused with FusionGel. Supporting temperature management.
  • Moulds and shapes to your head, neck and shoulders.
  • NZ Made.
  • 3 Year Warranty
  Flat Rate of $25 courier within NZ with NZ Post – Add $6 extra for rural delivery.
Original price was: NZD 349.00.Current price is: NZD 179.00. Select options This product has multiple variants. The options may be chosen on the product page
green 1 pin
Quick View
Slat Bed Holder – 1 Pin (Pack of 10)
  Flexible 1 pin shoe options - Please view our selection of Slat Holders before purchasing so you choose the correct ones. GREEN 1 PIN SHOE:
  • Approx 11mm hole diameter. 64mm wide and will fit slats approximately 54mm.
  • Price is for a pack of 10 - Works out at $2.50 per holder.
GREY 1 PIN SHOE:
  • Approx 9mm hole diameter. 60mm wide and will fit slats approximately 54mm.
  • Price is for a pack of 10 - Works out at $2.50 per holder.
  Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries) Please choose wisely and check your measurements before placing the order.      
NZD 25.00 Select options This product has multiple variants. The options may be chosen on the product page
PILPCL_Classic Latex Pincore Pillow_Art
Quick View
Logan & Mason Classic Latex Pincore Pillow
  Classic Latex Pincore Pillow by Logan & Mason.
  • The pincore construction of the Logan & Mason latex Pillow allows the circulation of air through the latex, keeping the pillow and sleeper cool and fresh. The construction also promotes healthful head and neck alignment utilising the support of latex while remaining soft and comfortable.
  • Unlike feathers and fibrous material, moulded latex will not create or hold dust and allergens.
  • The Logan & Mason pillow can be hand washed keeping its shape and supportive quality for years.
  $19 courier within NZ – Add $6 extra for rural delivery.
NZD 79.00 Add to cart
Sale
IMG_0876
Quick View
1 Pin Slat Bed Holder – Black (Pack of 10)
  Flexible 1 pin shoe  - Please view our selection of Slat Holders before purchasing so you choose the correct ones. BLACK 1 PIN SHOE:
  • Approx 9mm hole diameter. 60mm wide and will fit slats approximately 54mm.
  • Price is for a pack of 10 - Works out at $2 per holder.
  Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries) Please choose wisely and check your measurements before placing the order.      
Original price was: NZD 30.00.Current price is: NZD 20.00. Add to cart
flexi slat - non corugatted
Quick View
5 x Flexible Slats – Heavy Duty
  Price is for a pack of 5 x Non Corrugated slats of what ever size option you are after.
  • 775mm Length x 53mm Width x 9mm Depth
  • 915mm Length x 53mm Width x 9mm Depth
  • 1055mm Length x 53mm Width x 9mm Depth
  If you require a special measurement, please insert this size into the form when you purchase. If no measurement is indicated in the notes, we assume you want the larger size. Buy as many packs as you need for a one off courier freight charge within NZ. Other sizes are available. Please see other slat accessories. $19 courier within NZ – Add $6 extra for rural delivery. Please choose wisely and check your measurements as there are no refunds
Price range: NZD 50.00 through NZD 75.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-9409
Quick View
Waterbed Conditioner
  Waterbed Conditioner to look after the water and the vinyl. Waterbed conditioner is an essential treatment of your vinyl and water. The conditioner stabilizes the water to prevent algae and bacteria growth. Otherwise this can cause the water or vinyl to smell and also weaken the vinyl. Causing brittleness and a short life spam of the mattress.
  • To be added every 6 months.
  • 250ml bottle with child lock cap.
  • Made in Christchurch.
  Only $7 courier within NZ for as many bottles as you would like. Stock up so you won't forget every 6 months. ($6 extra for rural)
NZD 12.00 Add to cart
1237992885
Quick View
50mm – Push In Bed Leg
Bed leg glide only.
  • To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
  • 50mm high glide only.
  • View our other push in bed leg sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
NZD 14.00 Add to cart
spray glow
Quick View
Mirotone Spray Glow Furniture Polish
Mirotone Spray Glow Furniture Polish is what the professionals use to bring the shine back or to touch up those marks. Freight is only a one-off $7 within NZ. Buy as many as you like for the $7 courier flat rate. ($6 extra for rural deliveries)
NZD 27.00 Add to cart
Slat Bed Bolt 60mm x 6
Quick View
6 x Slat Bed Bolt
  Bed bolts for a slat bed.
  • M6 Thread - 60mm or 90mm length.
  • Price is for a pack of 6 - Buy in groups of 6. ( works out at $2 each)
  • Please see other slat accessories.
  Buy as many as you need for only $7 Freight. ($6 extra for rural deliveries)
NZD 12.00 Select options This product has multiple variants. The options may be chosen on the product page
38mm slat
Quick View
5 x Flexible Slats (38mm)
  Price is for a pack of 5 x Non Corrugated 38mm wide slats between 500 to 910mm.
  • If you require a special measurement, please insert this size into the form when you purchase.
  • Buy as many packs as you need for a one off courier freight charge within NZ.
  $19 courier within NZ – Add $6 extra for rural delivery. Other sizes are available. Please see other slat accessories. Please choose wisely and check your measurements.
Price range: NZD 45.00 through NZD 50.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-6334
Quick View
Bed Lugs – Set of 6
  14mm or 20mm barrel nut for slat bed bolts.
  • M6 - Metric 6mm Thread.
  • Price is for a pack of 6 - works out at $2 each.
  • Please see other slat accessories and 60mm to 90mm bolts that are used for these.
  Buy as many as you need for $7 freight - $6 extra for rural deliveries
NZD 12.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-4289
Quick View
55mm Height Bed Leg – Metric 8mm or 5/16 Threads
  Bed leg with a metric M8 thread or a Imperial 5/16 thread.
  • 55mm Height - Check out our other listings for other thread types and available sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)  
NZD 8.00 Select options This product has multiple variants. The options may be chosen on the product page
bed leg - medium
Quick View
105mm – Push In Bed Leg
  Small leg and Glide.
  • To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
  • 100mm Height bed leg and glide.
  • View our other push in bed leg sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
NZD 14.00 Add to cart

Website by Fatweb. All right reserved