Sale
Product Description
Winkl Weighted Queen Red Blanket – over 80% OFF
NZD 70.00
Winkl Bamboo Weighted Queen Blanket.
Colour: Red
Weight: 11kg
STOCK CLEARANCE – Over 80% OFF
Flat Rate of $35 courier within NZ with NZ Post – Add $6 extra for rural delivery.
What is a Weighted Blanket?
These blankets are designed to have more weight than typical blankets, and they can be between 2-13 kilograms. There are currently two styles of weighted blankets: knitted and duvet.
In knitted weighted blankets, dense yarn is woven into the fabric to create a heavier blanket that will hold you while you sleep. Duvet-style weighted blankets actually use plastic or glass beads to add weight to the blanket. When deciding between the two styles of weighted blankets, it really comes down to personal preference, however duvet-style weighted blankets tend to be heavier.
Weighted Blankets Help You Sleep?
The therapeutic technique behind weighted blankets is called deep pressure stimulation. Essentially, the blanket provides a constant firm pressure that naturally makes the body feel a sense of calmness. Weighted blankets have numerous other notable benefits that will enhance your sleep, including the following:
Provide Comfort and Relaxation
Wrapping yourself up in a weighted blanket may give you the necessary hug you need after a long day. The extra weight will provide you with a sense of comfort and security, allowing your body to feel a deep sense of relaxation. Weighted blankets are deemed “security blankets” for this reason!
Alleviate Anxiety
It’s a common phenomenon to experience increased anxiety around bedtime. While this is a rather unpleasant experience, a weighted blanket can take some of the anxiety away by reducing your nighttime cortisol levels. Cortisol is a stress hormone that can contribute to anxiety. Studies have found that there’s a significant improvement in anxiety when using a weighted blanket at night.
Enhance Your Sleep
A study in the Journal of Sleep Medicine & Disorders concluded that weighted blankets positively impact sleep both subjectively and objectively. The researchers reported that the participants did not restlessly move around in their sleep. On the other hand, participants claimed that they felt their sleep was enhanced due to the introduction of a weighted blanket.
Related Products
Bed legs or castors - Metric thread and the screw in pin is approximately 10mm.
NZD 24.00 – NZD 50.00
- Available in gold at a bargain clearance price - Can do a further discount for a bulk deal for 50 or more.
- Available in sets of 4,6, 9 and 12.
- To fit most older type Sleepmaker and Simmons Beautyrest models.
Flexible slat tension slider to fit flexible slats approximately 53mm wide.
NZD 30.00
- Price is for a pack of 10 - Works out at $3 each
- Overall size - 60mm x 50mm. ( Overall Thickness is 24mm - Internal Gap is 19mm )
Most popular headboard bolts sold for beds.
NZD 12.00 – NZD 22.00
- M8 Metric Thread.
- Fits most Sleepmaker, Slumbertime, Dunlop, Sleepyhead, Tattersfield and Simmons Beautyrest Beds.
- Price is for a set of two or four but buy as many as you like for only a one-off $7 courier charge.
Waterbed Repair Kit.
NZD 13.00
- Comes with 2 x small tubes of glue and piece of vinyl to cut to size.
- Repair instructions are in the packet.
DELUXE SET INCLUDES:
NZD 45.00 – NZD 65.00
- 4 male and 4 female brackets for the corners for a slat bed. Comes with allen key and 12 bolts. Overall length size - 115mm
- 4 L Shape corner brackets and 4 side rail brackets. Overall length size - 90mm
Bed leg with a metric M8 thread or a Imperial 5/16 thread.
NZD 8.00
- 55mm Height - Check out our other listings for other thread types and available sizes.
Slat bed tension set.
Tension Slat Kit includes:
NZD 125.00 – NZD 130.00
- 5 x 730mm slats or 910mm slats.
- 5 x tension slats.
- 10 x tension sliders.
Large Leg and Glide.
NZD 15.00
- To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
- 150mm high bed leg and glide.
- View our other push in bed leg sizes.
Flexible 2 pin shoe – Please view our selection of Slat Holders before purchasing so you choose the correct ones.
BROWN 2 PIN SHOE:
NZD 20.00
- 32mm from centre hole to centre hole. Overall size - 58mm x 30mm.
- Price is for a pack of 10 – Works out at $2 per holder.
Bed bolts for a slat bed.
NZD 12.00
- M6 Thread - 60mm or 90mm length.
- Price is for a pack of 6 - Buy in groups of 6. ( works out at $2 each)
- Please see other slat accessories.
100% Feather Pillow by Logan & Mason.
NZD 49.00
- All natural composition for rest and renewal - Experience the all natural 100% Pillow which combines 100% duck feather fill with a 300 Thread Count 100% Cotton Japara Cover, fully piped with corded trim.
- This pillow offers a generous 1200GM fill weight and walled gusset construction for maximum loft providing comfort, support and versatility.
- The Logan & Mason 100% Feather pillow is easy care machine washable and tumble dry-able.
Centre rail bracket set for wooden slat bed frame.
NZD 25.00
- Includes 1 female and 1 male end.
Small leg and Glide.
NZD 14.00
- To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
- 100mm Height bed leg and glide.
- View our other push in bed leg sizes.
Waterbed Conditioner to look after the water and the vinyl.
Waterbed conditioner is an essential treatment of your vinyl and water.
The conditioner stabilizes the water to prevent algae and bacteria growth.
Otherwise this can cause the water or vinyl to smell and also weaken the vinyl. Causing brittleness and a short life spam of the mattress.
NZD 11.00
- To be added every 6 months.
- 250ml bottle with child lock cap - Made in Christchurch.
Tension 700mm slat to be added for firmness or softness with the tension sliders.
Not to be used as slats for a slat bed.
Price is for a pack of 5. (Works out at $6 each)
Usually 5 per side is recommended. (You will need 2 tension sliders per slat)
$19 courier within NZ – Add $6 extra for rural delivery.
NZD 35.00