Mirotone Spray Glow Furniture Polish

Return to Previous Page

Product Description

bed leg - large
150mm – Push In Bed Leg NZD 15.00
Mazon Memory Foam Pillow Original price was: NZD 159.00.Current price is: NZD 129.00.

Mirotone Spray Glow Furniture Polish

NZD 27.00

Mirotone Spray Glow Furniture Polish is what the professionals use to bring the shine back or to touch up those marks.

Freight is only a one-off $7 within NZ. Buy as many as you like for the $7 courier flat rate. ($6 extra for rural deliveries)

Select delivery location

Categories: , ,

Related Products

product_image_608_1455137957 (1)
Quick View
Slat Bed Holder – 2 Pin (Pack of 10)
  Flexible 2 pin shoe  – Please view our selection of Slat Holders before purchasing so you choose the correct ones. BROWN 2 PIN SHOE:
  • 32mm from centre hole to centre hole. Overall size - 58mm x 30mm.
  • Price is for a pack of 10 – Works out at $2.50 per holder.
  Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries) Please choose wisely and check your measurements before placing the order.
NZD 25.00 Add to cart
repair kit
Quick View
Waterbed Repair Kit
  Waterbed Repair Kit.
  • Comes with 2 x small tubes of glue and piece of vinyl to cut to size.
  • Repair instructions are in the packet.
  $7 courier within NZ - $6 extra for rural
NZD 13.00 Add to cart
IMG-4288
Quick View
205mm Height Bed Leg – Metric 8mm or 5/16 Threads
  Bed leg with a metric M8 thread or a Imperial 5/16 thread. 205mm Height - Check out our other listings for other thread types and available sizes. Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)  
NZD 19.00 Select options This product has multiple variants. The options may be chosen on the product page
10mm Bed leg - castor
Quick View
Castor or Glide 145mm Bed Leg – Metric 10mm
Bed leg with a metric M8 thread. Choose either a castor wheel or a glide. This 10mm diameter thread only comes in a metric thread. Common for some import beds and the older Dunlop bed bases. Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
NZD 12.00 Select options This product has multiple variants. The options may be chosen on the product page
bed leg - large
Quick View
150mm – Push In Bed Leg
  Large Leg and Glide.
  • To fit most Sleepyhead, Tattersfield, Beautyrest and Sleepmaker push in model bases.
  • 150mm high bed leg and glide.
  • View our other push in bed leg sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
NZD 15.00 Add to cart
flexi slat - non corugatted
Quick View
5 x Flexible Slats – Heavy Duty
  Price is for a pack of 5 x Non Corrugated slats of what ever size option you are after.
  • 775mm Length x 53mm Width x 9mm Depth
  • 915mm Length x 53mm Width x 9mm Depth
  • 1055mm Length x 53mm Width x 9mm Depth
  If you require a special measurement, please insert this size into the form when you purchase. If no measurement is indicated in the notes, we assume you want the larger size. Buy as many packs as you need for a one off courier freight charge within NZ. Other sizes are available. Please see other slat accessories. $19 courier within NZ – Add $6 extra for rural delivery. Please choose wisely and check your measurements as there are no refunds
Price range: NZD 60.00 through NZD 75.00 Select options This product has multiple variants. The options may be chosen on the product page
Sale
IMG-6060
Quick View
Logan & Mason Mattress Cotton Protector
  Logan & Mason quality Cotton Mattress protector
  • 100% Cotton Fill - 230gsm.
  • 300 Thread Count cotton japara cover.
  • Deep 45cm fitted walls.
  • Easy care, machine washable
  Flat Rate of $25 courier within NZ with NZ Post – Add $6 extra for rural delivery.
Price range: NZD 65.00 through NZD 125.00 Select options This product has multiple variants. The options may be chosen on the product page
Sale
Latex Single Topper
Quick View
Latex Topper
  Natural Latex topper.
  • Bamboo zip off washable cover.
  • Available in all standard bed sizes Single, King Single, Double, Queen, King and Super King. Special sizes made to order.
  • Elastic straps ensure topper stays in the correct position 50mm thickness.
  $25 freight within NZ, rural an extra $6
Price range: NZD 699.00 through NZD 1049.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-4289
Quick View
55mm Height Bed Leg – Metric 8mm or 5/16 Threads
  Bed leg with a metric M8 thread or a Imperial 5/16 thread.
  • 55mm Height - Check out our other listings for other thread types and available sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)  
NZD 8.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-9674
Quick View
Headboard Bolt Sets – 60mm Metric Thread
  Most popular headboard bolts sold for beds.
  • M8 Metric Thread.
  • Fits most Sleepmaker, Slumbertime, Dunlop, Sleepyhead, Tattersfield and Simmons Beautyrest Beds.
  • Price is for a set of two or four but buy as many as you like for only a one-off $7 courier charge.
  (A $6 surcharge for rural deliveries apply) NOTE: Please check your bed and thread type before ordering, refer to our other Headboard bolts for a imperial 5/16 thread type as these are Metric thread only. Refer to our Sealy Headboard bolt for 5/16 thread type.  
Price range: NZD 12.00 through NZD 22.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-4144
Quick View
Slat Bed Holders #2 – (Pack of 10)
  Flexible 2 pin shoe options for metal rails and import beds – Please view our selection of Slat Holders before purchasing so you choose the correct ones. BLACK 2 PIN SHOE FOR SIDE RAIL:
  • Approximately 35mm from canter hole to Centre hole. Overall Width size - 65mm, Deep - 30mm. Inside maximum width for slat - 63mm. These will fit 53 or 60mm wide slats.
  BLACK 2 PIN DOUBLE SLAT SHOE FOR CENTRE RAIL:
  • Approximately 35mm from canter hole to Centre hole. Overall Width size - 55mm, Overall Depth - 53mm. Inside maximum width for slat - 53mm.
  These slat shoes are for the common metal frame beds. Please note the different sizes of these slat holders for fitting the slats. Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries) Please choose wisely and check your measurements before placing the order.
Price range: NZD 20.00 through NZD 30.00 Select options This product has multiple variants. The options may be chosen on the product page
Slat Bed Brackets - Deluxe
Quick View
Bed Bracket Sets
  DELUXE SET INCLUDES: 
  • 4 male and 4 female brackets for the corners for a slat bed. Comes with allen key and 12 bolts. Overall length size - 115mm
These are the strongest and best fittings for slat bed frames. Makes the bed very sturdy and our most popular bracket set sold. STANDARD SET INCLUDES:
  • 4 L Shape corner brackets and 4 side rail brackets. Overall length size - 90mm
  $7 courier within NZ - Add $6 to a rural address.
Price range: NZD 45.00 through NZD 65.00 Select options This product has multiple variants. The options may be chosen on the product page
38mm slat
Quick View
5 x Flexible Slats (38mm)
  Price is for a pack of 5 x Non Corrugated 38mm wide slats between 500 to 910mm.
  • If you require a special measurement, please insert this size into the form when you purchase.
  • Buy as many packs as you need for a one off courier freight charge within NZ.
  $19 courier within NZ – Add $6 extra for rural delivery. Other sizes are available. Please see other slat accessories. Please choose wisely and check your measurements.
Price range: NZD 45.00 through NZD 50.00 Select options This product has multiple variants. The options may be chosen on the product page
IMG-9672
Quick View
145mm Height Bed Leg – Metric 8mm or 5/16 Threads
  Bed leg with a metric M8 thread or a Imperial 5/16 thread.
  • 145mm Height - Check out our other listings for other thread types and available sizes.
  Price is for 1 only but buy as many as you like for only a one-off $7 courier charge. (A $6 surcharge for rural deliveries apply)
NZD 11.00 Select options This product has multiple variants. The options may be chosen on the product page
green 1 pin
Quick View
Slat Bed Holder – 1 Pin (Pack of 10)
  Flexible 1 pin shoe options - Please view our selection of Slat Holders before purchasing so you choose the correct ones. GREEN 1 PIN SHOE:
  • Approx 11mm hole diameter. 64mm wide and will fit slats approximately 54mm.
  • Price is for a pack of 10 - Works out at $2.50 per holder.
GREY 1 PIN SHOE:
  • Approx 9mm hole diameter. 60mm wide and will fit slats approximately 54mm.
  • Price is for a pack of 10 - Works out at $2.50 per holder.
  Buy as many as you need for $7 freight within NZ. ($6 extra for rural deliveries) Please choose wisely and check your measurements before placing the order.      
NZD 25.00 Select options This product has multiple variants. The options may be chosen on the product page

Website by Fatweb. All right reserved